Bmw Winkfp

Bmw Winkfp Tutorial
Bmw Winkfp Error 211
Bmw Winkfp Download

Nov 24, 2016 BMW 3-Series (E90 E92) Forum E90 / E92 / E93 3-series Technical Forums BMW Coding Updating all modules with WINKFP Thread Tools: Search this Thread. Apr 24, 2018 Open WinKFP, then choose “Import/Export” in the main menu, and pick “Import” then “PABD” Browse to your unpacked daten folder and drill down to “sgdat”. base SP-daten-E60 sgdat. Hit CTRL-A to select all files, then click “Import”.

BMW INPA Software is factory BMW diagnostics software that connects to all the systems and modules on BMW cars not just engine like generic scanners, it reads all BMW trouble codes and gives live diagnostics and data and GUI pages and test functions…

In this article include:INPA bmw ediabas 6.4.7 donload,inpa bmw ediabas 5.02 download,inpa bmw 5.0.6 ediabas downloadINPA 6.4.3 ediabas download,BMW INPA 5.02 and Ediabas 6.4.7 download,all of the can work with BMW INPA K+CAN Cable.

Inpa BMW Latest version Diagnostic Software Function List:

Support of all ECU use cases in Engineering, Test, Production and After Sales

* Specification of ECU’s diagnostic data

* Reading and clearing error memory

* FLASH data uploading and downloading

* Reading measurement value

* Input/output control

*Calibration of single ECU variables

* Coding of ECU variables

BMW INPA Software Coverage Vehicle List:

1 series E87

3 series E30 E36 E46 E90

5 series E34 E39 E60 E61

6 series E63 E64

7 series E32 E38 E65 E66

8 series E31 E52

Mini R50 R52 R53

X series E53 E83

Rolls Royce

Z series E85 E52.

If you find the download link is invaild,click to download:BMW Standard Tools 2.12 Free Download

include:

EDIABAS: 7.3.0 1.1

-Tool32 4.0.3

-CANdriver 2.5.0.0

WINKFP 5.3.1

– CoAPI 3.13.2

NFS 5.2.9

– KMM SRV 4.31.1.0

INPA 5.0.6

NCS Expert 4.0.1

Several versions of BMW INPA diagnostic software are available on the aftermarket.

BMW INPA software, free download:

Below list the free download link collect form internet,if you find the link is invalid,pls tell me.

INPA 6.4.3 Full.rar (thegrayshadow.com)

INPA 6.4.3 Full.rar (mediafire.com)

INPA Ediabas 6.4.3(MEGA)

INPA Software (mediafire.com)

INPA 5.0.6 rar (thegrayshadow.com)

INPA ediabas 5.02 download (tested work 100% ok)

(tested) inpa-5.02.zip + inpa-driver.zip

Win7 Win8 Win10 Installation please check this article:

Notice of using inpa bmw

1.Before using this equipment, keep the battery of notebook fully charged to avoid battery broken. Don’t charge the battery while diagnosing (the charger may interfere with diagnosis). Before charging, discharge the battery. You may knock down the battery and connect the power line during long time diagnosing. To make sure the battery life. 2***65289; While testing, make sure the diagnostic lines well connected.
3.Be sure to start diagnosing after all icons on bottom right of screen displayed regularly.
4.After finished diagnosing, back the screen to the main interface, then shut down the key and pull out the connector.
5.Don’t cut the power or connector during test.
Don’t touch the high temperature components in carriage during test.

NOTE:

Most INPA software above are shared by forum members. INPA 5.0.2 is verified working version works with BMW INPA K+DCAN USB cable

You may also have interests in:

Professional Diagnostic Solution & Service Supplier

BMW Standard Tools is the software suite distributed by BMW Group that contains several interoperating applications and drivers, including NCS Expert, WinKFP, NFS, INPA, Tool32, and others. Here is the free download link for V2.12.

Hardware:

A PC (Operating system: Win XP 32 bit /VMware Win 7 32 or 64 bit)

An INPA/EDIABAS K+DCAN USB Diagnostic cable (cheap €19 in eobdtool.co.uk)

How to set up BMW Standard Tools 2.12?

Step 1: Download BMW Standard Tools 2.12

Download here and install follow system prompts:

Step 2: Download and install INPA

http://www.maxdown.org/download.php?file=BMW%20Inpa/Ediabas%20v5.06&host=b

Step 3: Download and install NCS Expert ENG

Make sure your EDIABAS should already be configured to STD:OBD for use with INPA
cable. Download EDIABAS configurator here:

This tool (in C:EDIABASEdiabas-Konfiguratorfolder) allows
you to easily change the ediabas.ini to your desired interface. So if you are
switching from INPA to E-Sys you could use this to switch from STD: OBD to ENET.

Set COM port for INPA cable

Connect the INPA DCAN cable with PC Install device deriver Come to My Computer>>Device Manager>>Ports (COM&LPT)

In this case it’s COM5. We need to change this in the obd.ini file located
in the c:ediabasbin folder.

Right click on your INPA cable driver for example mine is labeled “USB Serial Port” and click on properties. Now in the property window click on the advanced tab.

Now every driver is different but the important part is the settings such as latency timer and received and transmit bytes. See pic below for the ideal settings. You may also change the COM port number here as well for tutorial I left it at 5. Once your changes are done we can proceed by clicking OK to accept the changes. No close all windows to return to the desktop.

Browse to C:EDIABASBIN and find file obd.ini and
open it with an editor (e.g Notepad)

The First 3 lines will look like this…

[OBD]
Port=Com1
Hardware=USB

Need to change the Port to reflect our INPA cable which in our case
is COM port 5. So change it to look like this…

[OBD]
Port=Com5
Hardware=USB

NOTE: Remember which USB port you connected your cable to as plugging it into a different USB port will allocate the INPA cable to a different COM port and neither tool will see the cable until the original USB port is used again or changed in device manager and obd.ini as mentioned above. Now to test if your cable installed correctly. Plug it into the vehicle’s OBD port and open
INPA.

Step 6: SPDATEN Files

Download and install SPDaten files (always recommend the latest) in this case it is 50.2 until I finish zipping and upload SPDatens 51.0 and upload it to share. (Follow the instructions provided at the end of the blog labeled “How to start WinKFP” which will explain how to import the SPDaten files to WinKFP)

Once downloaded you can now

**EDITED 10-12-2013**

For NCSExpert to install or update the data files, copy the files from SP-daten-E##daten to
the C:NCSEXPERDATENE## (where E## is whatever chassis you’re
updating). You will also want to copy the files from SP-daten-E##SGDAT to C:NCSEXPERSGDAT (they’re not separated into different chassis in NCS Expert, so you just want to copy and paste everything to that directory. Overwrite everything it asks about). Then copy the files from SP-daten-E##ECU to C:EDIABASECU

After copying the data files to
c:NCSEXPERDATENE## copy the following files to the following locations:

copy C:NCSEXPERDATENE##*.000
C:NCSEXPERDATEN
copy C:NCSEXPERDATENE##*.DAT C:NCSEXPERDATEN
copy C:NCSEXPERDATENE##*.ASC C:NCSEXPERDATEN

2. After installation, the directory (Drive letter):EC-APPSNFSSGDAT contains file CABI.h only and doesn’t contain files, required for working.

3. Mount the Progman disk in virtual drive (or insert in usual DVD-drive), extract all files SP-daten-Exx.rar from directory (Drive letter):CIP-Installerbin, each one in its own directory.
(You must get directories like SP-daten-Exx)

4. Now copy all *.IPO files from every directory (Drive letter):SP-daten-Exxsgdat to directory (Drive letter):EC-APPSNFSSGDAT.
For this purpose better use Total Commander, it allows overwriting elder files
with newest. This directory now looks like this:

5. In the same way refresh directory (Drive letter):EDIABASEcu with files taken from (Drive letter):SP-daten-Exxecu 6.
Run WinKFP

7. Choose “Import/Export – Import – Assemly line data” and import all data needed from directories (Drive letter):SD-daten-ExxDATA Details how to import assembly line data are given
in official manual for WinKFP

8. After importing the data, copy all files from directory (Drive letter):SD datenE70DATAgdaten to directory (Drive letter):EC-APPSNFSDATAGDATEN, overwriting all existing files.

Note: If you use Progman v.30 for updating WinKFP, it has error in file GDATENSgidc.as2. Simply open this file with Notepad and delete line 165.

WinKFP is ready for programming

ICOM for BMW ISIS ISID A+B+CPlus V2014.06 External HDD Support Multi-language

Bmw Winkfp Tutorial

Bmw Winkfp Error 211

BMW INPA K+CAN USB Interface PC Based BMW Diagnostic Tool